Lab technician in blue gloves holding a petri dish and swab

CERTIFIED RESIDENTIAL & COMMERCIAL MOLD TESTING  |  SEATTLE & THE EASTSIDE

Mold Inspection & Air Quality Testing

Unbiased visual mold inspections, spore trap indoor air quality sampling, and surface swab testing analyzed by accredited independent laboratories—with zero remediation conflict of interest.

100% UNBIASED MOLD & AIR QUALITY TESTING

Objective, Lab-Verified Answers on Indoor Mold

Whether you notice a persistent musty odor, spot visible staining in an attic or crawlspace, or want peace of mind before buying a property, guesswork isn't enough. Because RW West does not perform mold remediation or removal, our testing is 100% conflict-of-interest-free—giving you accurate air and surface lab results you can trust.

Spore Trap Air Quality Sampling

Using calibrated air-sampling pumps and spore trap cassettes, we capture airborne mold spores in target rooms and compare them against an outdoor baseline control sample—identifying elevated airborne spore counts even when no surface growth is visible.

PROTECTING YOUR HEALTH & PROPERTY

Prompt Mold Testing Matters

Unaddressed indoor mold growth can impact indoor air quality—triggering respiratory irritation or allergic reactions in sensitive individuals—while gradually degrading porous building materials like wood framing, drywall, subflooring, and insulation.

Whether you are in the middle of a real estate transaction or investigating an indoor air quality concern at home or work, we tailor our sampling plan to your specific property.

Tailored Testing Options

  • Pre-Purchase Buyer Add-On or Stand-Alone Testing: Add air or surface sampling to your home inspection or schedule a standalone mold visit.

  • Homeowner & Tenant Air Quality Testing: Investigate musty odors, past leaks, or suspect growth in attics and crawlspaces.

  • Post-Remediation Clearance Testing: Independent air sampling after mold removal to verify spore levels have returned to normal.

  • Commercial & Multifamily Assessments: Objective sampling and laboratory documentation for offices, multifamily units, and retail buildings.

Surface Swab & Tape-Lift Sampling

When visible discoloration or suspect growth is observed on attic sheathing, crawlspace framing, window sills, or drywall, we collect direct surface swab or tape-lift samples to confirm whether the material is fungal growth and identify the exact genera present.

Accredited Lab Report in 24–48 Hours

All collected samples are analyzed by an independent, accredited laboratory. Within 24 to 48 hours, you receive a clear laboratory report detailing spore concentrations, mold species identification, and straightforward recommendations.

Visual Inspection of Accessible Areas

Our certified inspectors carefully examine accessible living spaces, attics, basements, and crawlspaces for visible signs of suspect mold growth, water staining, and ventilation or dampness conditions that warrant laboratory sampling.

ACCREDITED LABORATORY SAMPLING

What Our Mold Inspection & Testing Covers

We combine a targeted visual evaluation of accessible areas with scientific air and surface sample collection—giving you definitive laboratory data on indoor spore levels and mold species.

1

2

3

4

WHAT TO EXPECT

Our 4-Step Mold Testing Process

Every mold inspection follows a clear, scientific protocol—from your initial walkthrough to accredited laboratory results.

Consult & Walkthrough

We review your concerns, property history, and any musty odors or past leaks to select the most effective sampling areas.

Visual Assessment

Our inspector examines accessible living areas, attics, and crawlspaces for visible suspect growth.

Air & Surface Sampling

We collect calibrated spore trap air samples (compared to an outdoor control sample) and direct surface swabs.

Lab Analysis & Report

Samples are analyzed by an accredited lab, and you receive a clear written report and lab breakdown within 24–48 hours.

COMMON QUESTIONS

Mold Inspection & Testing FAQs

When to schedule a mold inspection or air quality test?

We recommend scheduling an assessment if you notice persistent musty odors, visible staining on attic sheathing or crawlspace framing, past plumbing or roof leaks, or before closing on a property with a history of moisture intrusion.

How should I prepare for indoor air quality sampling?

For the most accurate air sample results, keep windows and exterior doors closed for at least 12 to 24 hours prior to testing, and avoid running portable HEPA air purifiers or exhaust fans right before your scheduled appointment.

Are your mold inspectors certified and independent?

Yes. All of our inspectors are WA-licensed, InterNACHI-certified building diagnosticians, and all samples are analyzed by accredited independent laboratories. Because we never sell remediation services, our findings are 100% objective.

How long does testing take and to receive lab results?

The on-site inspection and sample collection typically take 1 to 2 hours depending on the size of the property and number of samples collected. Accredited laboratory results and your written report are delivered within 24 to 48 hours.

Can I add mold testing to my inspection?

Yes. Mold inspection, surface swab sampling, and indoor air quality testing can be ordered as a stand-alone service or bundled directly with your home or commercial property inspection.

Why don't you perform mold remediation or removal?

Industry best practices separate mold testing from mold remediation to protect property owners from conflicts of interest. We provide unbiased testing and post-remediation clearance verification, and can refer you to local remediation specialists if removal is needed.

Ready to Schedule Mold or Air Quality Testing?

Bundle air or surface sampling with your property inspection, or request a standalone testing quote today.

7537 S Laurel St

Seattle, WA 98178

425-885-0722

RW West Inspections logoRW West Inspections logo

Quick Links

Services

Areas we serve: Seattle, Bellevue, Kirkland, Redmond, Bothell, Woodinville, Sammamish, Issaquah, Mercer Island, Renton, Kenmore, Newcastle, Lynnwood, Edmonds, Mill Creek, Everett, Shoreline, Kent, Tacoma and Puyallup

© 2026 RW West Consultants Inc.  ·  WA Home Inspector License #565  ·  All Rights Reserved